The Skateboard Builder's Manual
Start with the full process, then dive into the variable that is giving you trouble. These guides are built around real shop work, not copied instructions.
Lamination / Guide 001
Proper Glue-Up
Veneer orientation, coverage, timing, stacking and loading.
Pressing / Guide 002
Optimal Squeeze-Out
How to read glue at the edge of your pressed laminate.
Equipment / Guide 003
DIY Shop Press Setup
A practical low-cost press build and what you should reinforce.
Design / Guide 004
Deck Studio
Build measurable concave, pockets, kicks, wheelbase and shape.
Diagnose / Library
Troubleshooting
Voids, springback, delamination, uneven kicks and other problems.
Coming Next
7-Ply Layup & Veneer Direction
Long grain vs crossband and why the stack is arranged the way it is.
Builder Lab
How Much Pressure?
Understanding force, mold area and why gauge pressure is not the whole story.
Builder Lab
Understanding Springback
What can change after the mold opens and why cure conditions matter.
Finishing
From Uncut to Finished Deck
Drilling, cutting, routing, sanding, sealing and graphics.